Shop

bstAIR – Air and Nitrogen boosters

bstAIR – Air and Nitrogen boosters

There are many industries and processes where compressed air and nitrogen are used at higher pressures of up to 40 bar. PET blowing, laser cutting, pressure tests and abrasive cutting are among some of the widespread processes in which air or nitrogen boosters can be an integral part of the installation. The bstAIR booster can be connected to the plant’s low-pressure network. The standard booster range has a discharge pressure of up to 40 bar, with a flow range of 0.4 m3/min to 3.6 m3/min.

Low cost of maintenance, reliability, and a thoughtful approach to details make the booster an attractive piece of technology to integrate into the production process.

Call Airtools WA  to discuss further

SKU: BSTAIR Category:
Free Delivery on orders below 15 kgs.

Secure payments, shop with confidence.

In Stock

Orders placed before 2PM EST ship the same day

Dispatch in 24 hours

 

Any question? Call Us! Canning Vale
1300 062 377

Product Description


BSTAIR_15-20 - Air and Nitrogen boosters

Booster technology: how does it work?

Air or nitrogen is compressed in a single-stage pump using the standard operating cycle of a piston compressor. Compression starts at a low pressure moving through the joint work of the inlet and outlet solenoid valves. The compressed air or nitrogen then enters the booster where it is further compressed up to 40 bar, in a single stage. The inlet pressure switch stops the booster when the inlet pressure exceeds the maximum allowed value or drops below the minimum allowed value. Cooling is provided by the axial fan installed on the shaft of the booster.

The booster is lubricated by the oil in the crankcase. The crankcase is vented via the oil separator and the oil breather, which allows operation with minimum oil carryover.

Smart technical advantages

Highly reliable single-stage pump

– Advanced materials and treatment of main components

– Robust, reliable design and easy access for service

– Low vibration level

Direct-driven set

– Highly efficient IE3 motor as standard

– Fully enclosed air-cooled, IP55, F-class motor for heavy-duty operation

Electrical cubicle with soft starter

– Low electrical peaks

– Gradual stop of the motor

– 24V transformer is installed inside the cubicle

User Reviews


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery & Pick-up


FAST AND FREE DISPATH
  • 98% of products are dispatched within 1 business day
  • Allow 5-10 business days for delivery
1/19 Mordaunt Circuit, Canning Vale Western Australia 6155

Delivery & Tracking
  • Tracking number emailed instantly after dispatch
  • Your item will be shipped via Courier which requires a signature for collection.
  • Phone number required: Our courier will call to book the delivery day.
  • A delivery day, not time: Our discounted rates require you to be home 9am-6pm on the day of delivery. Perhaps a business address is more convenient for you.
Warranty & Returns

Air Tools WA warrants that the equipment manufactured by it and delivered hereunder shall be free of defects in material and workmanship for a period of twelve (12) months from the date of purchase, unless otherwise stated. Replacement parts will be warranted for the remainder of the original warranty period. Should any failure to conform to this warranty be reported in writing to the Company within the said period, the Company shall, at its option, correct such non conformity by suitable repair to such Equipment, or furnish a replacement part F.O.B. point of shipment, provided the purchaser has installed, maintained and operated such equipment in accordance with good industry practices and has complied with the specific recommendations of the Company. Accessories or equipment furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturer conveyed to Airtools WA and which can be passed onto the Purchaser. The Company shall not be liable for any repairs, replacements, or adjustments to the Equipment or any costs of labour performed by the Purchaser without the Company’s prior written approval.

The Company makes no performance warranty unless specifically stated within its proposal and effects of corrosion, erosion and normal wear and tear are specifically excluded from the Company’s Warranty. In the event performance warranties are expressly included, the Company’s obligation shall be to correct in a manner and for the period of time provided above.

THE COMPANY MAKES NO OTHER WARRANTY OF REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND HEREBY DISCLAIMED.

Correction by the company and nonconformities, whether patent or latent, in the manner and for a period of time provided above, shall constitute fulfilment of all liabilities of the company and its distributors for such nonconformities with respect to or arising out of such Equipment.

If you wish to claim Warranty, you must present your original sales receipt.

Limitation of Liability

THE REMIDIES OF THE PURCHASER SET FORTH HEREIN ARE EXCLUSIVE, AND THE TOTAL LIABILITY OF THE COMPANY, ITS DISTRIBUTORS AND SUPPLIERS WITH RESPECT TO THE CONTRACT OR THE EQUIPMENT AND SERVICES FURNISHED, IN CONNECTION WITH THE PERFORMANCE OR BREACH THEROF, OR FROM THE MANUFACTURER, SALE,DELIVERY, INSTALATION, REPAIR OR TECHNICAL DIRECTION COVERED BY OR FURNISHED UNDER CONTRACT, WHETHER BASED ON CONTRACT, WARRANTY, NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR OTHERWISE SHALL NOT EXCEED THE PURCHASE PRICE OF THE UNIT OF EQUIPMENT UPON WHICH SUCH LIABILITY IS BASED.

THE COMPANY, ITS DISTRIBUTORS AND ITS SUPPLIERS SHALL IN NO EVENT BE LIABLE TO THE PURCHASER, ANY SUCCESSORS IN THE INTEREST OR ANY BENEFICIARY OR ASSIGNEE OF THE CONTRACT FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES ARISING OUT OF THIS CONTRACT OR ANY BREACH THEREOF, OR ANY DEFECT IN, OR FAILURE OF, OR MALFUNCTION OF THE EQUIPMENT, WHETER OR NOT BASED UPON LOSS OF USE, LOSS PROFITS OR REVENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON- OPERATION, INCREASED EXPENSES OF OPERATION, COST OF PURCHASE OF REPLACEMENT POWER, OR CLAIMS OF PURCHASER OR CUSTOMERS OF PURCHASER FOR SERVICE INTERRUPTION WHETER OR NOT SUCH LOSS OR DAMAGE IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR OTHERWISE.